MOTOREX 1LCROSS POWER 4T SAE 10W/60 MA2

MOTOREX 1LCROSS POWER 4T SAE 10W/60 MA2

Fully synthetic, high-performance 4-stroke engine oil, specially developed for off-road motorcycles. When developing this oil, in close cooperation with racing teams and motorcycle manufacturers, special attention was paid to the specific demands of off-road use. JASO MA2 approval guarantees fault-free operation of wet multi-disc clutches.

CROSS POWER 4T SAE 10W/60 MA2

The above information corresponds to the current state of knowledge. We reserve the right to make changes. The industry-standard measurement and production tolerances apply to the specified characteristics. A safety data sheet on the described product is available.

Fully synthetic, high-performance engine oil for 4-stroke off-road motorcycles.

Description

Fully synthetic, high-performance 4-stroke engine oil, specially developed for

off-road motorcycles. When developing this oil, in close cooperation with racing teams and motorcycle manufacturers, special attention was paid to the specific demands of off-road use. The JASO MA2 approval guarantees fault-free operation of wet multi-disc clutches.

Product features

fully synthetic

specially formulated for the most demanding off-road use

Race quality

very high thermal and shear stability

Catalytic converter tested

ideal for wet multi-disc clutches

(JASO MA2 approval)

Area of ​​application

MOTOREX CROSS POWER 4T is available in three different viscosities for off-road use. Ideal for

motorcycles with wet multi-disc clutches. It also meets the highest

manufacturer specifications.

Note

Warning: Harmful to aquatic organisms;

long-term effect.

Specifications

API SM, API SN, API SP, JASO MA2, KTM LC4 2007+

Technical data

Properties Method Units Values

Colour yellow-brown

Viscosity SAE 10W/60

Density at 20 °C g/cm3 0.853

Viscosity at 40°C DIN 51562-1 mm2/s 160.6

Viscosity at 100°C DIN 51562-1 mm2/s 24.5

Viscosity index DIN ISO 2909 185.0

Viscosity according to HTHS at 150°C CEC-L-36 A-97 mPa.s >= 3.5

Flash point DIN EN ISO 2592 °C >= 200

Pour point ASTM D5950 °C -42

NOACK CEC L-40-A-93 % 5.00

Sulphated ash DIN EN ISO 6245 % 0.81

TBN DIN ISO 3771 mgKOHg 7.10

CCS ASTM D5293 mPa.s 3490

CCS Temperature ASTM D5293 °C -25