MWR RACING AIR FILTER WSB DUCATI MC-020-19

MWR RACING AIR FILTER WSB DUCATI MC-020-19

MWR developed an exceptional filter for the Hypermotard 950, the complete air filter cover is replaced by the new MWR high performance filter. A much larger air box inlet opening, resulting in much greater air flow with much more power than any other sport filter... we can't rule out the increase in the beautiful induction noise.

Brand Model Year

Ducati Hypermotard 950 2018 2019 2020 2021

MWR developed an installation bracket to install the ECU in the original location without damaging the filter or ECU or making other modifications

The filter and installation bracket can be purchased separately or as a set

Filter part no.: MC-020-19

Installation bracket part no.: MWR-MC-020-19

Complete set part no.: MC-022-19

1) Remove the original air filter cover + original filter

2) Place the filter and the six screws halfway. Then tighten them all

3) Check if the installation lips bend at the correct angle

4) Loosen and remove the four lower screws again

5) Attach the MWR installation bracket and tighten it with the new screws included

6) Reattach the rubber ECU bracket like the original

The MWR Performance air filter = excellent performance and maximum protection. It is not a copy of the original filter, we always look for solutions regarding performance, protection or fit, which is why some models deviate from the original.

Tuning like all other sport filters