HEALTECH GIPRO ATRE GPAT-A01 GEAR INDICATOR

HEALTECH GIPRO ATRE GPAT-A01 GEAR INDICATOR

Installation

The GIpro GPAT plugs directly into the stock gear sensor connectors.

It also requires a separate connection to a 12V low-voltage source, such as the position light or rear brake light.

The GIpro w/ATRE GPAT-A01 Aprilia 1 Gear Indicator is compatible with

APRILIA RSV4 [without-ABS] (2009-2016), RSV4 [ABS] (2009-2016), RSV Tuono V4 [without-ABS] (2009-2016), RSV Tuono V4 [ABS] (2009-2016).

The GIpro GPAT (ATRE G2) integrates two products in one device - it is a gear indicator with a built-in TRE ("Advanced Timing Retard Eliminator") device. Only available for certain Aprilia, Kawasaki, Suzuki and Triumph models – check the HT Finder if your bike is compatible with the GIpro GPAT.

Gear counter: the GIpro GPAT directly reads the signal from the stock gear position sensor, without making any calculations or estimates. That's why it's the fastest on the market. However, there are few bikes that include a stock gear sensor and DO NOT have a stock gear counter, so only some Aprilia, Kawasaki, Suzuki and Triumph models can take advantage of the GIpro GPAT. In case your bike is not compatible, you can always install a GIpro X-Type (compatible with all bikes) or perhaps a GIpro DS Series (for bikes with a suitable diagnostic socket).

ATRE function: Removes the stock restrictions (if any) on the lower gears. Improves the throttle response between 1st and 3rd gears. It also overrides the speed limiter on some motorcycle models (e.g. Suzuki GSX-R1000, GSX-1300R, M109R and DL1000).

Other features

Auto gear learning – The GIpro GPAT usually works first time, without any initial programming. However, if necessary, the GIpro can learn the gear positions automatically.

Auto brightness adjustment – ​​The brightness is automatically adjusted to compensate for ambient light. This can be changed manually if necessary.

Reverse orientation – The digit display can be reversed so that the housing can be mounted with the cable facing upwards.

Touch sensor programming – No loose buttons or cables.

100% waterproof

Easy installation – no cutting or soldering of cables.

2 year warranty

The kit includes adhesive tape to stick the display to any surface, but there are also brackets available for any handlebar size.