ZETA ADVENTURE HANDGUARDS ZE72-600

ZETA ADVENTURE HANDGUARDS ZE72-600

ADVENTURE ARMOR HANDGUARD

SPECIFICATIONS:

- Handguard made of high-grade aluminum that fits wide bending angles and short handlebars, especially on adventure touring bikes and dual sport bikes.

- Short overall body length reduces interference with the shroud/screen or meter, and a selected flat head bolt at the connection part with the U-clamp further reduces interference with the screen.

- Spacers are included to prevent interference with the end of the lever and to adjust the position of the guard body.

- All guards for Armor guards can be fitted.

- Inner diameter 13.5 to 19 mm for φ22.2 mm handlebar.

A long-type U-clamp is designed to largely avoid brake hoses, banjos and cables.

When mounting on a handlebar with stays, check to make sure there is a mounting space for the U-clamp.

Two types of bar end spacers are included to prevent lever interference and to adjust the installation.

The spacers provide more clearance between the guard and the throttle and switch housings. There is no need to relocate them on the handlebar, just keep them in the original position.