ZASGRIP RS660 ORIGINAL TANK

Anti-slip tank. Thickness 3mm.

For RS660 for original tank.

Specially designed for track use.

Fitting and conditions of use : This Grip is designed for intensive use on the circuit, although it is also possible to use it on the open road, it has a high resistance to abrasion, however, it should be used with leather overalls or garments that do not have thick seams, buttons, zips or rubber or plastic dressings, otherwise it could be prematurely deteriorated.

The placement should be done with the fuel tank clean, degreased and dry, it is recommended to start the gluing by the central part and continue on one side after the other, the correct position will be about 5mm from the top corner of the tank, the adhesive is sensitive to pressure, once placed press hard for proper anchoring, in case of having to change / remove the grip of the tank, the removal of the adhesive should be done with plenty of alcohol, and rubbing with a cloth dampened in it, no other product removes better the remains of the adhesive of the fuel tank.